The stoplight switch # RM-751490 and the monitor light that's included in the Demco SBS Stay-IN-Play DUO Supplemental Braking System # SM99251 do the same job, so you wouldn't need it if you decided to go with the Stay-IN-Play DUO.
The stoplight switch would be needed if you we to use a different permanent braking system. view full answer...
For a 2022 Jeep Wrangler Rubicon you would be able to use the etrailer Invisible Base Plate Kit # e98948 that you were already looking at as long as you have a factory plastic bumper. If you don't let me know and we can see which baseplate fits with your bumper.
To complete the physical connection to your motorhome you'll need the etrailer SD Non-Binding Tow Bar # e34ZR. This tow bar comes with safety cables bracketed to the arms so you won't have to worry at the
For your lighting I... view full answer...
The best place to start for tow bar lighting for your 2023 Jeep Wrangler will be the Roadmaster kit part # RM-15267 which once installed puts a 6-way on the front of the Jeep and then to complete the charge circuit all you would need is the part # RM-156-25 which would run from the Jeep battery to the Roadmaster 6-way and you'd be set. view full answer...
The Hopkins Custom Tail Light Wiring Kit for Towed Vehicles # HM56200 just has the 4 pole you'll need, but to connect it to your RV you're also going to need the Roadmaster 7-Wire to 6-Wire Flexo-Coil Kit # RM-146-7.
If you needed a complete flat tow setup as well, you're also going to need:
- A base plate kit # RM-521448-5,
- A tow bar # RM-676,
&
- A braking system # RM-9060 with the seat adapter # RM-88130. view full answer...
We do have a Second Vehicle Kit # SM99209 for the Demco Air Force One # SM99243. This kit contains everything needed for the vehicle side of the Air Force One. You would also need the Air Jumper # SM99666 and depending on which air connection you already have you may need the Replacement RV-Side Pushlock Connector # SM99625 if yours is not the same as the Demco. view full answer...
That is a very valid question Durwin, but the Aries Pro Series Grille Guard part # AA2170000 does not have coverage for the fenders. Just the bumper and grille. view full answer...
A winch like the Bulldog Winch Standard Series Off-Road Winch # BDW10041 would suit your needs but I only have pricing on the winch which as shown on the product page. We have a network of dealers which I can direct you to but we don't know their installation costs to give you any kind of estimate. Check out the link below which lists all of our local installers. I went ahead and used 49346 for the zip code but you can change it if a different zip is better.
You will also need to decide... view full answer...
Thanks for reaching out, Donald!
The Paramount Rugged Ridge winch bumper on your 2023 Jeep Wrangler Unlimited covers the place where a typical base plate kit will install so you'll need to use D-Ring mounts, granted your bumper is approved for this.
These are the Blue Ox kits that you'll use depending on your D-Ring size:
- 7/8" # BX88357
- 1" # BX88358
I'm not seeing that your bumper is rated for flat towing but you'll want to double check with your vendor to make sure. If your bumper... view full answer...
We can get your 2014 Jeep Wrangler set up with a wiring harness so you can flat tow it while also using the Brake Buddy Select 3 Portable Supplemental Braking System # HM39524.
All you'll need is a simple diode wiring harness, and for that use the Roadmaster Diode 7-Wire to 6-Wire Flexo-Coil Wiring Kit # RM-15267. view full answer...
Yep, we have both of those things for your 2024 Jeep Wrangler JLU. For the second vehicle kit for your Demco Air Force One # SM99243 you need the following part:
- Second Vehicle Kit for Demco Air Force One Flat Tow Brake System # SM99209
Then for tow bar wiring, that will depend on if your '24 Wrangler has the optional ParkSense proximity sensors or not.
- WITH ParkSense: Roadmaster Smart Diode 7-Wire to 6-Wire Wiring Kit for Variable Voltage LED Tail Lights # RM63MR
- WITHOUT ParkSense:... view full answer...
Both of the AC units in the Furrion Chill HE RV Air Conditioner System - Multi Zone - 15,000 Btu # FR47FJ get wired to the thermostat. There is not wireless technology with these units. view full answer...
Yes, you can replace your GE air conditioner with the 15,000 Btu Furrion Chill HE RV Air Conditioner System # FR55PV.
This will be a complete replacement with no parts of your current AC used; no other parts are needed except for what comes with the # FR55PV. view full answer...